BSP-Yocto-FSL-i.MX8MP-ALPHA2            2021-03-12
==================================================

- Linux NXP Vendor Kernel v5.4.70_2.3.0-phy5 (based on NXP tag rel_imx_5.4.70_2.3.0)
- U-boot v2020.04_2.3.0-phy3 (based on NXP tag rel_imx_5.4.70_2.3.0)
- Yocto 3.0.4 (zeus)

NOTE:
This is an ALPHA release and has not been tested for full functionality. It is
possible that some features are not working correct or stable.

Tested Yocto Images:
--------------------
- phytec-qt5demo-image:
  * phyboard-pollux-imx8mp-1
  * phyboard-pollux-imx8mp-2

- phytec-vision-image:
  * phyboard-pollux-imx8mp-2


Build Environment:
------------------
- Ubuntu 16.04 64-bit


Features:
---------
- Added support for new machine:
  * phyboard-pollux-imx8mp-2
- Booting from EMMC and SD-Card is supported
- Added new features (on machine phyboard-pollux-imx8mp-2):
  * PEB-WLBT-05 WLAN support (kernel)
  * mini PCIe (kernel)
  * FEC Ethernet (bootloader/kernel)
  * RS232 and RS485 support (kernel)
  * PEB-AV-10 support LVDS Display and Audio (only playback) (kernel)
  * CAN FD
- Added new features (both machines):
 * gstreamer examples

Known Issues/Limitations:
-------------------------
- PEB-AV-10 colours are wrong


BSP-Yocto-FSL-i.MX8MP-ALPHA1            2020-10-30
==================================================

- Linux NXP Vendor Kernel v5.4.47_2.2.0-phy2 (based on NXP tag rel_imx_5.4.47_2.2.0)
- U-boot v2020.04_2.2.0-phy2 (based on NXP tag rel_imx_5.4.47_2.2.0)
- Yocto 3.0.4 (zeus)

NOTE:
This is an ALPHA release and has not been tested for full functionality. It is
possible that some features are not working correct or stable.

Tested Yocto Images:
--------------------
- phytec-qt5demo-image:
  * phyboard-pollux-imx8mp-1


Build Environment:
------------------
- Ubuntu 16.04 64-bit


Features:
---------
- Added support for new machine:
  * phyboard-pollux-imx8mp-1
- Booting from EMMC and SD-Card is supported
- Added new features:
   * EEPROM support (u-boot/kernel)
   * 2x USB 3.0 host support (kernel)
   * EQOS Ethernet 1 GBit (u-boot-imx/kernel)
   * SD-card support (u-boot-imx/kernel)
   * Support for RTC (kernel)
   * display support with LVDS1 (kernel)
   * HDMI (kernel)
   * SPI NOR flash (no booting possible)
   * GPU + VPU (kernel)
   * temperatur sensors on module (kernel)
   * debug UART over USB (bootloader/kernel)
   * VM-016 camera support on CSI1 interface (kernel)

Known Issues/Limitations:
-------------------------
- CAN FD is working but connector pin out is wrong


Changelog of Release Notes
--------------------------
2020-10-30
  - initial version