BSP-Yocto-Ampliphy-AM62Lx-ALPHA2                2025-07-17
==========================================================

- Linux TI vendor kernel v6.12.33 (based on TI tag 11.01.02)
- U-Boot TI vendor v2025.01 (based on TI tag 11.01.02)
- Yocto 5.0.10 (Scarthgap)
- Qt 6.8

Tested Yocto Machines:
----------------------

- am62lxx-libra-fpsc-1
 * phytec-qt6demo-image/ampliphy-vendor
- am62lxx-libra-fpsc-2
 * phytec-qt6demo-image/ampliphy-vendor


Build Environment:
------------------

- Ubuntu 22.04 64-bit


Supported features in this Release:
-----------------------------------

This is the second alpha release for the phyCORE-AM62Lx FPSC. The following interfaces are currently working:

* SD-Card
* eMMC
* QSPI-Flash
* RTC
* EEPROM
* Temperature sensors
* RS232
* RS485
* CAN FD
* 2x GBit Ethernet
* LVDS 10" Display
* ADC (onboard)
* USB 2.0

Booting is supported from:

* SD-Card
* eMMC (UDA with filesystem mode only)
* USB DFU
* UART

**Issues Fixed**
^^^^^^^^^^^^^^^^

* Resolved a boot issue on ALPHA1 caused by an incorrect tiboot3.bin
  symlink in the Yocto deploy directory.
* Corrected Ethernet device aliases: end0 and end1 are now correctly
  configured and include the alternative names eth0 and eth1.

**Known Issues**
^^^^^^^^^^^^^^^^