Release Notes phyCORE-i.MX35 Linux BSP:

PD09.1.0:	Official Release    06/03/2009

Support added for:
    - Display
    - Ethernet
    - UART
    - NOR flash
    - USB host
    - USB device
    - I2C

		
PD09.2.0:	Official Release    12/17/2009

Support added for:
    - Touch
    - Audio out
    - Audio in
        - NAND Flash filesystem (ST NAND08GW3B2, Samsung K9K8G08UOA)
        - CAN
        - SPI
        - User space GPIO       
    - One wire

Known Issues:
    - Due to a hardware issue, booting from NAND is not possible
      with PL 1315.1 / 1315.2

PD10.1.0:	Official Release    03/17/2010

Support added for:
    - SD card
    - support for 532Mhz controller
    - Nand boot support

Known Issues:
    - Due to a hardware issue, booting from NAND is not possible
      with PL 1315.1 / 1315.2

PD10.2.0	Official Release    02/21/2011

    - u-boot-v2:  change flash and ram timings for IM590 support

PD12.1.1	Official Release    12/14/2012

Support added for:
    - Bootloader: Barebox
    - Kernel 3.2
    - UBIFS as root filesystem

Known Issues:
	- Due to a hardware issue, booting from NAND is not possible with PL 1315.6
	  and PCM 970.  If you use a custom baseboard, make sure to set 2K-NAND
	  i.MX35 Boot Configuration Pin or use eFuses to support booting from NAND.