Release Notes phyCORE-Vybrid Linux BSP
===============================================================
PD15.1-rc1					4/02/2015
---------------------------------------------------------------

NOTE: This is a release candidate version of PHYTECs 
Linux BSP, aka ALPHA Version.

 - U-Boot 2013.07
 - Linux Kernel 3.13
 - Timesys Factory

Build Environment:
------------------
 - Ubuntu 12.04 LTS 64-bit

Support Added For:
------------------
	- Boot modes:
		- SD/MMC
		- NAND
	- UART: 
		- RS-232 via SCI_1 (Default Console)
		- RS-232 via SCI_2
	- Ethernet: RMII0; RMII1
	- RTC: Internal RTC
	- I2C driver
		- EEPROM: at24 on I2C_2
	- SPI driver (disabled in dts by default)
	- SD/MMC: MMC via MCU_PTA24-29 signals
	- NAND driver
	- USB_0 in Host Mode
	- Display: EDT ETM0700G0DH6 LVDS (LCD-018-070-KAP)
	- LCD Backlight: PWM
	- PMIC
	- Watchdog
	- MCC: Cortex-A5 (Linux) and Cortex-M4 (MQX)
	
What's Not Supported:
---------------------
	- Boot modes:
		- QSPI
	- CAN
	- QSPI: N25Q128 on QSPI_A, QSPI_B
	- USB_1 in Host Mode
	- Display: Prime View PM070WL4 LVDS (LCD-017-070W)
	- Touchscreen Controller: 
		- Capacitive: EDT FocalTech FT5x06 on I2C_2
		- Resistive: STMPE811 on I2C_2 
	- External RTC: RV-4162-C7 on I2C_2 
	- Audio: Freescale Codec SGTL5000 connected to I2S (I2C_2) 
	- Light Sensor
	- High Speed Timer
	- Power Management: Suspend to RAM

Additional Notes:
---------------------
 - U-Boot environment variables modified to use uImage and dtb file naming consistent with Timesys factory output:
	* uImage-3.13-ts-armv7l
	* pcm052.dtb