Release Notes phyCORE-AM335x WEC7 BSP:
=========================================

PD12.1.0	Alpha Release	2012/10/31
----------------------------------------------------

Support added for:

	- Serial
	- NAND Flash
	- Ethernet (only bootloader)
	- Touch
	- SD-Card
	- USB Host
	- USB device
	- Display (LDC-017-070W)

Known Issues:


PD13.1.0	Release	2013/03/27
----------------------------------------------------

Support added for:

	- I2C
	- RTC
	- EEPROM
	- CAN
	- SPI

Bugfixes:

	- Ethernet now working in OS
	- Boot Time optimized
	- Boot Config could be stored in NAND Flash


Known Issues:
	
	- Ethernet (for getting IP over DHCP it is necessary to execute "ipconfig /renew" after boot)
	- No SD card detection implemented


PD13.2.0	Release	2013/07/11
----------------------------------------------------

Support added for:

	- LCD-018 + capacity Touch
	- 1 GBit Ethernet
	- GPIO driver
	- Audio Driver
	

Bugfixes:

	- SD card: Implement Card detection interrupt
	- Splashscreen could now be flashed into NAND Flash through SD Card
	- MPU Frequency is raised to 720 MHz
	- Ethernet: Device hangs after disconnect the ethernet cable
	- Ethernet: If the device boot up without connected ethernet cable it
		    takes 40 seconds more time to boot.
	- Boot time optimized


Known Issues:
	
	- Sometimes USB OTG Active Sync is not starting. Reboot is necessary
	- Audio: For some reasons Audio is not working at startup
		 Disable the Windows system sounds to get Audio working on running system.