Instruction guide ================= How to activate the: - mt9p031-monochrome camera driver (VM-011-BW / VM-011-BW-LVDS - camera series) You can only one of the camera patches activate! for PD15.1.1 linux i.MX6 phyFLEX BSP ==================================== 1) Check out BSP PD15.1.1 for phyFLEX-i.MX6 linux and install/compile the sources appropriate instruction guide for YOCTO BSP 2) Per default you have a device tree for the "VM-011-COL" 3) For generate a new device tree with the VM-011 Kamera follow this steps: 4) Load the Patch "0003-Devicetree_for_VM-011-BW_at_i2c_0x48_with_54MHz.patch" for VM-010-BW - series from PHYTEC ftp 5) Move the patch into directory "\build\tmp-glibc\work\phyflex_imx6_1-phytec-linux-gnueabi\linux-mainline\3.19.5-phy4-r0\git\arch\arm\boot\dts\... 6) Start for appliance the pach the command: - git am 7) Go to your workpath and compile the device tree new: - bitbake virtual/kernel -c compile --force - bitbake virtual/kernel -c deploy -f 8) Load the new xxx.dtb datei on your controller board * We recommend to use the gstreamer scripts for testing. The VM-011 has more gstreamer scripts in the .../more_mt9p031_scripts/ - directory.